According to Korean media reports, Samsung Electronics has identified the cause of the Galaxy Note 7 explosion, and will release an investigation report in mid-January 2017. It is reported that the cause of the Galaxy Note 7 explosion is not just battery defects.
According to people familiar with the matter, Samsung Electronics’ investigation into the Galaxy Note 7 explosion has been completed. The investigation is strictly confidential within the company. A very small number of employees are informed and the results will be announced in mid-January 2017.
Samsung Electronics said in September 2016 that the Galaxy Note 7 explosion was caused by a defective battery, which caused the battery to overheat and ignite during use. The disassembly report of the Galaxy Note 7 by the external organization showed that in order to improve the performance of the Galaxy Note 7, Samsung added too many zero components in the internal space of the mobile phone, resulting in insufficient space for the battery, and the battery swells during charging to cause overheating and explosion.
This report has not been directly confirmed by Samsung Electronics, but it is understood that Samsung’s upcoming investigation report may indicate that the cause of the Galaxy Note 7 explosion is not only the problem of battery design, but the overall design of the mobile phone. The reason for the battery overheating is explained.
After the internal investigation, Samsung Electronics has sent investigation reports to relevant departments in South Korea and the United States. At the same time, after the investigation, the development of Galaxy S8 will also advance rapidly. Due to the delay of the Galaxy Note 7 explosion, Samsung has suspended the research and development of new products. After the results of the investigation, it will be confirmed whether it will be applied to Galaxy Note 7. New features and designs are applied to other products.
Samsung's product upgrade plan generally applies the latest technology application and design to large-size screen mobile phones. After half a year, it is applied in the flagship product. If the latest technology cannot be used, the upcoming Galaxy S8 market will be competitive. In order to better complete the development of this product and conduct enough tests, Samsung has delayed the release date of the Galaxy S8 to April 2017, two months later than in previous years.
KNM3 Series Moulded Case Circuit Breaker
KNM3 series Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .
KNM3 series Molded Case Circuit Breaker,Small Size Molded Case Circuit Breaker,Electrical Molded Case Circuit Breaker,Automatic Molded Case Circuit Breaker
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmannualmotorstarter.com