Recently, Texas Instruments announced the introduction of a high-frequency synchronous boost structure LED driver - TPS61050. It provides a constant inrush current source to drive a single high brightness white LED. Inductive fixed-frequency pulse-width modulation (PWM) control technology minimizes input ripple current and meets the requirements of white LED flash lamps in a variety of applications, including camera phones, smart phones, PDAs, and other general-purpose lighting. application. This 2mm x 1.5mm x 0.625mm microminiature device is suitable for a variety of small external components, reducing the overall solution size to less than 25mm2.
TI's TPS61050 chip (IC) uses a 2MHz switching frequency, allowing the use of a small form factor, low profile 2.2μH inductor. The TPS61050 device can be used both as a regulated current supply and as a standard boost regulator. This additional mode of operation is useful for powering other high power devices in the system, such as audio power amplifiers or other components that require a supply voltage that is higher than the battery voltage.
For maximum flexibility, the device's LED current or required output voltage can be programmed through an I2C-compatible interface. The TPS61050 also simplifies design by integrating four preset modes of operation. To simplify the synchronization of the flash and camera modules, the device also provides a trigger pin for fast LED start-up time. When the TPS61050 is not operating, the shutdown mode can be entered through the I2C-compatible interface, reducing the input current to 0.3μA. During shutdown, the LED pins are in a high impedance state to avoid leakage current through the LEDs.
Key features:
? Four working modes:
?ILED up to 1200mA flashlight and flash mode;
? Output voltage adjustable boost converter: 4.5/5.0/5.25V;
? Shutdown mode: 0.3mA (typical);
The overall solution circuit area is less than 25mm2;
? efficiency up to 96%;
Up to 400kbps I2C compatible interface;
? Integrated LED start safety timer;
An integrated analog-to-digital converter for LED forward voltage monitoring;
? Integrate weak lighting mode;
? The LED is turned off during the off period;
Open/short LED protection;
? Over temperature protection.
Availability
The TPS61050 is available now in volume production and can be ordered through TI's and its distributors worldwide network. The device is available in a 2mm x 1.5mm 12-lead chip scale package and a 10-pin QFN package.
Lighting and display solutions
TI offers the broadest portfolio of high performance products to meet today's LED design requirements including power management, such as AC/DC, power factor correction, DC/DC and linear power conversion; RF transceivers; DSP and ultra low Power consumption MCU, etc. TI products support a wide range of applications, including the industry's ultra-small portable display and the largest lighting and display panels. In addition, TI's native support and application expertise can help designers accelerate time-to-market.
1
Carbon Steel Plate Mill,Automatic Cold Rolling Mill,Reversible Cold Rolling Mill,Cold Rolling Mill
Haoshuo Technology Co., Ltd. , http://www.whrollformingmachine.com