The Characteristics and Wiring of Sensor Interface of Keli House Smart Home System

The Characteristics of Sensor Interface of Keli House Smart Home System

Corey House smart home system, the system allows the inclusion of third-party sensors to achieve system alarm detection. The change of the signal detected by the sensor can trigger any custom action of the system (for example, the signal of the sensor can be used as a trigger condition of the schedule manager event, or can be used as a trigger condition of the voice control entry of the telecontroller and the SMS controller SMS alarm entry. Trigger conditions, etc.)

The third-party sensors can be accessed through the sensor interface of the multi-function panel or smart switch and can be accessed through the sensor interface module through centralized wiring.

Wiring of sensor interface module

Sensor interface module provides eight-way interface, can add 8 sensor signals, each address can be independently addressed (addressing information includes the installation address and sensor type. Note: the interface must be addressed before use; for the unused interface, should Clear the address of the interface of the way, and can choose "normally open" / "normally closed" according to the actual contact. Multiple sensor interface modules can be installed in the system and the management software will automatically identify them.

Third-party sensor (or dry contact) interface definition

If users need to access third-party sensors or dry contacts, they can order in advance, order multi-function panels, smart switches, or sensor interface modules with sensor interfaces; in addition, multi-function probe repeaters can also connect to three-party sensors or dry contacts. The sensor interface of the multi-function panel and smart switch uses the 6P4C (RJ11) interface.

The 6P4C sensor crystal head pin is defined as follows:

1-power.

2-power ten 12V.

3- For the sensor interface of the multi-function panel, this end can be connected to any type of sensor or dry contact signal; for the sensor interface of the smart switch, the end is connected to the human body movement sensor or door and window (ie curtain, door sensor) or other Non-security sensors.

4- For the sensor interface of the multi-function panel, this end can be connected to any type of sensor or dry contact signal; for the sensor switch interface of the smart switch, it is connected to a gas sensor or smoke sensor or other non-security sensor.