Motor 150c Nc Thermal Protector 7am

TS 16949 certified motor thermal protector manufacturer for automotive, window lift, wiper, juicer and blender
 
Motor overload and over-current bimetal Protector
Specifications
bimetal protector 
1.temp:50~180C 
2.current:15~30A 
3.voltage:250/150VAC 
4.tolerance: +/-5
Motor overload and over-current bimetal Protector
 
Specification:
1)High current:30A 
2)Temp range:50-180C
3)High cycle life and reliability
4)Best price
 
Special Features:
1. Small Size
2. Temperature is 100% calibrated
3. Snap Action
4. Both temperature and current sensitive
5. Type and length of wires are optional
6. Terminals can be same or opposite end
7. 100% comply with RoHS.
Special Features of thermal protectors:
 
1. Terminals are optional and customizing

2. Wires are optional and customizing
 
3. Small size, long life and high reliability

4. Both temperature and current sensitive.
 
5. High quality level bimetal ensures that it can withstand the current of normal circuit.

6. The combination of bimetal and heater can action snappily.

7. Accurate trip off time can prevent motor from overheating or loading;


* Electrical Ratings of 6APE thermal protector:
 
 
* Technical Parameters of thermal protectors:
 
 
* Applications of thermal protectors:
 
1. Window lift motor, skylight motor, aerial motor, and wiper motor
2. Various engines, dc motors, juicer motors
3. Various washing machines, vacuum cleaners and gardening equipments
 
* Type Classification of thermal protector:
 
1. Type 2B: Automatic Control, micro-disconnection on operation, and, manufacturing deviation and drift of its operating value, operating time or operating sequence have been declared and tested.
 
2. Type 3C: for thermal motor protector only
 
 
* Crucial tests and relevant methods of thermal protector:
 
1. Electric strength: Test voltage 1250VAC 50HZ applied between insulation sleeve and live parts, and 500VAC applied between two opened contacts, for 1 minute, no flashover or breakdown.
 
2. Endurance test: Number of automatic cycles declared as 10,000 cycles, the test shall be carried out under 1.15 VR for 200 cycles, the balance 9800 cycles should be carried out under rated voltage
 
3. Moisture resistance test:
Humidity Treatment: Relative humidity(%): 91-95%; Temperature: (20-30+/-1) C degree
Keep samples under this environment for 48 hours. No damage so as to impair compliance with this standard.
 
4. Manufacturing deviation:
The appropriate operating value or operating sequence shall be recorded for each sample. No two samples shall differ from each other by an amount exceeding the declared manufacturing deviation.
Tolerance of trip-off temperature: +/-5K
The temperature of oven may be rapidly increased to 10K below the expected operating temperature. Rate of temperature change reduced to max 0.5K/min or as declared.
 
5. Synchorous test:
 minutes continuous operation test, no flicking occurs.

 Product Description
17AMI thermal protector advantages:
• Miniature size.
• Individually temperature calibrated and checked.
• Positive make and break with Klixon snap action disc.
• Repeatable temperature performance over life.
• Gasket steel case suitable for many impregnation processes.
• Current and temperature sensitivity for maximum design flexibility.
• Wide selection of leads and insulating sleeves.
• Same size and opposite side terminations.
• Cadmium free contacts.

Technical parameters of 17AMI thermal protector:
Rating: 22 A / 115 V--- AC, 10 A / 250 V--- AC, 20 A / 16 V--- DC
Action temperature range: 55 ºC~ 185 ºC ±5ºC
Tolerance:±5ºC
Dimension: 23×10.4×4.6 mm
Contact resistance:<40mΩ
Insulation resistance:>100MΩ
Response speed:≤1ºC/min
Operation cycles: >10000 Times
Approvals: UL CSA TUV CQC RoHS

Applications: 
• Shaded Pole Motor
• Permanent split capacitor motor
• Fluorescent lighting ballasts
• HID ballasts
• Transformer
• Recessed lighting fixtures
• Battery packs
• Vacuum cleaners
• Automotive accessory motors, solenoids, PC boards





  
  


 
 
1.Once we get your inquire for our switches, we will reply you within 30 min
2.Checking the drawing and all details of our switches with you, if you think it is ok, then we need your signature on our drawing for final confirmation.
3.Quotation will be sent to you accordingly.
4.After getting your signed quotation, samples will be sent to you immediately.
5.If our switches passed your testing, you may release to us.
6.Receiving your official order, we will let you know our shipping date soon.
7.Paying 50% for us, we will start to proceed your order to keep the goods finished on-time.
8.Balance 50% payment before shipment.
9.Getting all payment from you, goods will be shipped to you per your requested shipping way

Samples & Packaging & Shipping:
1)Samples:
A.Free for you, Quantity less than 6 pcs, freight collected.
B.Lead time for samples: 3~7 days for preparing samples.

2) Shipping
A.Couriers:Fedex, DHL, UPS, TNT
B.Other: Air or by Sea
As we have a long time cooperation with Courier agent, we can get a priority price for you. We can quote you the transportation charges at first for your comparasion.

FAQ
Q1--What is your MOQ?
In general ,our MOQ is 500 pcs, it will be more convenient and safety on packaging. Of course, it can be negotiable according to your situation.
Q2--What is the delivery time ?
3-7 days for samples; 10-30 days for batch goods.
Q3--Can you give me samples to test and how many samples?
Yes, we provide free samples, with shipping and taxes paid by the buyer. Usually, free samples are 1~10 pieces.
Q4--Does your products through UL, ROHS certification and so on?
Yes, our switches are with UL, CUL, VDE, TUV, ENEC, CE, CQC, Nemko, CB approved, meet EU, RoHS standard.
Q5--Can you accept OEM?
Yes, we can accept OEM and ODM, they are welcome by us. But please offer us your authorization certification.
Q6--Is there cheap shipping cost to our country?
For small order, express will be best. And for bulk order, shipping by sea is better, but it takes much time.
TS 16949 certified motor thermal protector manufacturer for automotive, window lift, wiper, juicer and blender
 
Motor overload and over-current bimetal Protector
Specifications
bimetal protector 
1.temp:50~180C 
2.current:15~30A 
3.voltage:250/150VAC 
4.tolerance: +/-5
Motor overload and over-current bimetal Protector
 
Specification:
1)High current:30A 
2)Temp range:50-180C
3)High cycle life and reliability
4)Best price
 
Special Features:
1. Small Size
2. Temperature is 100% calibrated
3. Snap Action
4. Both temperature and current sensitive
5. Type and length of wires are optional
6. Terminals can be same or opposite end
7. 100% comply with RoHS.
Special Features of thermal protectors:
 
1. Terminals are optional and customizing

2. Wires are optional and customizing
 
3. Small size, long life and high reliability

4. Both temperature and current sensitive.
 
5. High quality level bimetal ensures that it can withstand the current of normal circuit.

6. The combination of bimetal and heater can action snappily.

7. Accurate trip off time can prevent motor from overheating or loading;


* Electrical Ratings of 6APE thermal protector:
 
 
* Technical Parameters of thermal protectors:
 
 
* Applications of thermal protectors:
 
1. Window lift motor, skylight motor, aerial motor, and wiper motor
2. Various engines, dc motors, juicer motors
3. Various washing machines, vacuum cleaners and gardening equipments
 
* Type Classification of thermal protector:
 
1. Type 2B: Automatic Control, micro-disconnection on operation, and, manufacturing deviation and drift of its operating value, operating time or operating sequence have been declared and tested.
 
2. Type 3C: for thermal motor protector only
 
 
* Crucial tests and relevant methods of thermal protector:
 
1. Electric strength: Test voltage 1250VAC 50HZ applied between insulation sleeve and live parts, and 500VAC applied between two opened contacts, for 1 minute, no flashover or breakdown.
 
2. Endurance test: Number of automatic cycles declared as 10,000 cycles, the test shall be carried out under 1.15 VR for 200 cycles, the balance 9800 cycles should be carried out under rated voltage
 
3. Moisture resistance test:
Humidity Treatment: Relative humidity(%): 91-95%; Temperature: (20-30+/-1) C degree
Keep samples under this environment for 48 hours. No damage so as to impair compliance with this standard.
 
4. Manufacturing deviation:
The appropriate operating value or operating sequence shall be recorded for each sample. No two samples shall differ from each other by an amount exceeding the declared manufacturing deviation.
Tolerance of trip-off temperature: +/-5K
The temperature of oven may be rapidly increased to 10K below the expected operating temperature. Rate of temperature change reduced to max 0.5K/min or as declared.
 
5. Synchorous test:
 minutes continuous operation test, no flicking occurs.

 Product Description
17AMI thermal protector advantages:
• Miniature size.
• Individually temperature calibrated and checked.
• Positive make and break with Klixon snap action disc.
• Repeatable temperature performance over life.
• Gasket steel case suitable for many impregnation processes.
• Current and temperature sensitivity for maximum design flexibility.
• Wide selection of leads and insulating sleeves.
• Same size and opposite side terminations.
• Cadmium free contacts.

Technical parameters of 17AMI thermal protector:
Rating: 22 A / 115 V--- AC, 10 A / 250 V--- AC, 20 A / 16 V--- DC
Action temperature range: 55 ºC~ 185 ºC ±5ºC
Tolerance:±5ºC
Dimension: 23×10.4×4.6 mm
Contact resistance:<40mΩ
Insulation resistance:>100MΩ
Response speed:≤1ºC/min
Operation cycles: >10000 Times
Approvals: UL CSA TUV CQC RoHS

Applications: 
• Shaded Pole Motor
• Permanent split capacitor motor
• Fluorescent lighting ballasts
• HID ballasts
• Transformer
• Recessed lighting fixtures
• Battery packs
• Vacuum cleaners
• Automotive accessory motors, solenoids, PC boards





  
  


 
 
1.Once we get your inquire for our switches, we will reply you within 30 min
2.Checking the drawing and all details of our switches with you, if you think it is ok, then we need your signature on our drawing for final confirmation.
3.Quotation will be sent to you accordingly.
4.After getting your signed quotation, samples will be sent to you immediately.
5.If our switches passed your testing, you may release to us.
6.Receiving your official order, we will let you know our shipping date soon.
7.Paying 50% for us, we will start to proceed your order to keep the goods finished on-time.
8.Balance 50% payment before shipment.
9.Getting all payment from you, goods will be shipped to you per your requested shipping way

Samples & Packaging & Shipping:
1)Samples:
A.Free for you, Quantity less than 6 pcs, freight collected.
B.Lead time for samples: 3~7 days for preparing samples.

2) Shipping
A.Couriers:Fedex, DHL, UPS, TNT
B.Other: Air or by Sea
As we have a long time cooperation with Courier agent, we can get a priority price for you. We can quote you the transportation charges at first for your comparasion.

FAQ
Q1--What is your MOQ?
In general ,our MOQ is 500 pcs, it will be more convenient and safety on packaging. Of course, it can be negotiable according to your situation.
Q2--What is the delivery time ?
3-7 days for samples; 10-30 days for batch goods.
Q3--Can you give me samples to test and how many samples?
Yes, we provide free samples, with shipping and taxes paid by the buyer. Usually, free samples are 1~10 pieces.
Q4--Does your products through UL, ROHS certification and so on?
Yes, our switches are with UL, CUL, VDE, TUV, ENEC, CE, CQC, Nemko, CB approved, meet EU, RoHS standard.
Q5--Can you accept OEM?
Yes, we can accept OEM and ODM, they are welcome by us. But please offer us your authorization certification.
Q6--Is there cheap shipping cost to our country?
For small order, express will be best. And for bulk order, shipping by sea is better, but it takes much time.

DBC Substrate

DBC (Direct Bonded Copper) Substrate is a special process board where copper foil is bonded directly to the surface (single or double sided) of and AI203 OR AIN ceramic substrate at high temperatures and can be etched with various graphics. It has excellent electrical insulation performance, high thermal conductivity, excellent soft brazability, high adhesion strength and a large current-carrying capacity. DBC Substrate mainly used in the fields of rail transit, smart grid, new energy vehicles, industrial frequency conversion, household appliances, military power electronics, wind and photovoltaic power generation.

We custom high precision DBC Substrate with drawings provided by customers. The raw material we use for etched DBC substrate is Ceramic-based double-sided copper clad laminate. We are equipped with professional metal etching equipment and exposure development equipment. Our etching process can achieve double-sided etching of different graphics with 0.3 mm - 0.8mm thickness of copper clad laminate. Also, we can guarantee that our double-sided copper clad laminate substrate is neatly arranged, straight surface line, and have no burr, high product accuracy.

Its superiorities of DBC Substrate are as follow:

1. A ceramic substrate with a coefficient of thermal expansion close to that of a silicon chip, which saves the transition layer of Mo chips, saving labour, material and cost.

2. Excellent thermal conductivity, making the chip package very compact, thus greatly increasing the power density and improving the reliability of systems and devices.

3. A large number of high-voltage, high-power devices have high requirements for heat dissipation, and ceramic substrates have a better heat dissipation effect.

4. Ultra-thin (0.25mm) ceramic substrates can replace beo, without environmental toxicity problems.

5. Large current carrying capacity, 100A continuous current through 1mm wide 0.3mm thick copper body, temperature rise of about 17 ℃; 100A continuous current through 2mm wide 0.3mm thick copper body, temperature rise of only about 5 ℃.

6. High insulation withstand voltage, to ensure personal safety and equipment protection

7. New packaging and assembly methods can be realized, resulting in highly integrated products and reduced size

8. The ceramic substrate is highly resistant to vibration and wear, ensuring its long service life.

High Precision DBC Substrate,Etched DBC Substrate,Double-Sided Copper Clad Laminate Substrate

SHAOXING HUALI ELECTRONICS CO., LTD. , https://www.cnsxhuali.com