In recent years, China has been committed to promoting green products and developing green lighting projects, which has greatly promoted the promotion of high-efficiency lighting products. However, with the popularization of high-efficiency lighting products, the lack of energy efficiency standards for products has gradually emerged, and has become a bottleneck restricting the development of the industry. Industry insiders have called for lighting energy efficiency standards to be improved.
Product standard blank points
According to industry insiders, although the number and content of energy efficiency standards for lighting products in China are more than those of other countries, some standards are outdated, and some standards are missing.
"It is true that outdated standards have brought great difficulties to the promotion of current energy conservation work. We are working on the revision of some standards." Zhao Yuejin, a senior engineer at the China National Institute of Standardization, told reporters.
He also said that the energy efficiency standard GB1789-1999 "tube fluorescent lamp ballast energy efficiency limit value and energy conservation evaluation value" has been released for nearly 10 years, has not been revised yet, the standard is currently using the American method, but with the technology fast Development, internationally more identifiable to European standards. At present, the standard has been approved by the China National Standardization Administration, and the revision work is underway.
In addition, energy efficiency standards for products such as double-ended fluorescent lamps for general lighting, self-ballasted fluorescent lamps for general lighting, and single-ended fluorescent lamps have been released for five years, and all have reached the standard revision period, and the standards should be improved. Zhao Yuejin explained that single-ended fluorescent lamps are widely used in architectural lighting for homes, hotels, businesses, etc., and energy efficiency rating standards should be added when energy efficiency standards are revised. Experts pointed out that at present, only light source products have energy efficiency standards, and call for ballasts, incandescent lamps, LED lamps, exit indicators, indoor grille lamps, and street lamp lamps urgently need to set energy-saving standards.
Engineering energy conservation remains a mistake
Zhao Jianping, a professor at the Chinese Academy of Building Sciences, said that in addition to energy-saving standards, there are still shortcomings in the energy-saving standards for lighting projects.
Zhao Jianping believes that some energy-saving standards need to be revised from the actual situation. For example, in a small space, it is difficult to meet the standard of lighting energy saving. The office lighting should be appropriately relaxed when the standard is revised. In addition, he also suggested that the lighting design should add third parties in addition to self-audit and self-examination. Review agency.
He also said that there is a blind pursuit of beauty and brightness in the architectural night lighting, but it ignores energy conservation. For example, road lighting energy-saving standards only stipulate the standards for motor vehicle roads, and should also supplement the lighting energy efficiency standards for non-motor vehicle lanes, sidewalks and other places. In addition, the standards for motor vehicle traffic roads need to be further severely restricted according to actual conditions to raise standards.
In addition, energy efficiency standards for products such as double-ended fluorescent lamps for general lighting, self-ballasted fluorescent lamps for general lighting, and single-ended fluorescent lamps have been released for five years, and all have reached the standard revision period, and the standards should be improved. Zhao Yuejin explained that single-ended fluorescent lamps are widely used in architectural lighting for homes, hotels, businesses, etc., and energy efficiency rating standards should be added when energy efficiency standards are revised. Experts pointed out that at present, only light source products have energy efficiency standards, and call for ballasts, incandescent lamps, LED lamps, exit indicator lights, indoor grille lamps, and street lamp lamps urgently need to set energy-saving standards.
Policy promotion requires cooperation from all parties
In addition, there are certain difficulties in the promotion of energy conservation. Xu Peixin, deputy director of the Material and Energy Conservation Center, said that first, the energy-saving authorities in individual regions did not pay enough attention to the promotion work, and did not understand the demand for local high-efficiency lighting products. After the task was issued, I did not realize that the high-efficiency lighting product promotion project had the support of the central government, and it was doing practical things for the people. Instead, the promotion work was regarded as a burden. Second, instead of following the requirements, the selection of relatively concentrated, well-organized, and well-developed areas and users to carry out promotion work, but too scattered. Third, some enterprises have insufficient estimation of the difficulty of promotion work. The quotation is low at the time of bidding, and the marketing system has not yet been established, which has caused great difficulty in the promotion work.
He said that this year, organizations that need to strengthen efficient lighting work should be invited to cooperate with industry associations, scientific research, quality inspection, and industrial and commercial departments. At the same time, the media needs to support the promotion of efficient lighting products.
Product standard blank points
According to industry insiders, although the number and content of energy efficiency standards for lighting products in China are more than those of other countries, some standards are outdated, and some standards are missing.
"It is true that outdated standards have brought great difficulties to the promotion of current energy conservation work. We are working on the revision of some standards." Zhao Yuejin, a senior engineer at the China National Institute of Standardization, told reporters.
He also said that the energy efficiency standard GB1789-1999 "tube fluorescent lamp ballast energy efficiency limit value and energy conservation evaluation value" has been released for nearly 10 years, has not been revised yet, the standard is currently using the American method, but with the technology fast Development, internationally more identifiable to European standards. At present, the standard has been approved by the China National Standardization Administration, and the revision work is underway.
In addition, energy efficiency standards for products such as double-ended fluorescent lamps for general lighting, self-ballasted fluorescent lamps for general lighting, and single-ended fluorescent lamps have been released for five years, and all have reached the standard revision period, and the standards should be improved. Zhao Yuejin explained that single-ended fluorescent lamps are widely used in architectural lighting for homes, hotels, businesses, etc., and energy efficiency rating standards should be added when energy efficiency standards are revised. Experts pointed out that at present, only light source products have energy efficiency standards, and call for ballasts, incandescent lamps, LED lamps, exit indicators, indoor grille lamps, and street lamp lamps urgently need to set energy-saving standards.
Engineering energy conservation remains a mistake
Zhao Jianping, a professor at the Chinese Academy of Building Sciences, said that in addition to energy-saving standards, there are still shortcomings in the energy-saving standards for lighting projects.
Zhao Jianping believes that some energy-saving standards need to be revised from the actual situation. For example, in a small space, it is difficult to meet the standard of lighting energy saving. The office lighting should be appropriately relaxed when the standard is revised. In addition, he also suggested that the lighting design should add third parties in addition to self-audit and self-examination. Review agency.
He also said that there is a blind pursuit of beauty and brightness in the architectural night lighting, but it ignores energy conservation. For example, road lighting energy-saving standards only stipulate the standards for motor vehicle roads, and should also supplement the lighting energy efficiency standards for non-motor vehicle lanes, sidewalks and other places. In addition, the standards for motor vehicle traffic roads need to be further severely restricted according to actual conditions to raise standards.
In addition, energy efficiency standards for products such as double-ended fluorescent lamps for general lighting, self-ballasted fluorescent lamps for general lighting, and single-ended fluorescent lamps have been released for five years, and all have reached the standard revision period, and the standards should be improved. Zhao Yuejin explained that single-ended fluorescent lamps are widely used in architectural lighting for homes, hotels, businesses, etc., and energy efficiency rating standards should be added when energy efficiency standards are revised. Experts pointed out that at present, only light source products have energy efficiency standards, and call for ballasts, incandescent lamps, LED lamps, exit indicator lights, indoor grille lamps, and street lamp lamps urgently need to set energy-saving standards.
Policy promotion requires cooperation from all parties
In addition, there are certain difficulties in the promotion of energy conservation. Xu Peixin, deputy director of the Material and Energy Conservation Center, said that first, the energy-saving authorities in individual regions did not pay enough attention to the promotion work, and did not understand the demand for local high-efficiency lighting products. After the task was issued, I did not realize that the high-efficiency lighting product promotion project had the support of the central government, and it was doing practical things for the people. Instead, the promotion work was regarded as a burden. Second, instead of following the requirements, the selection of relatively concentrated, well-organized, and well-developed areas and users to carry out promotion work, but too scattered. Third, some enterprises have insufficient estimation of the difficulty of promotion work. The quotation is low at the time of bidding, and the marketing system has not yet been established, which has caused great difficulty in the promotion work.
He said that this year, organizations that need to strengthen efficient lighting work should be invited to cooperate with industry associations, scientific research, quality inspection, and industrial and commercial departments. At the same time, the media needs to support the promotion of efficient lighting products.
Antenk dip plug connector Insulation Displacement termination connectors are designed to quickly and effectively terminate Flat Cable in a wide variety of applications. The IDC termination style has migrated and been implemented into a wide range of connector styles because of its reliability and ease of use. Click on the appropriate sub section below depending on connector or application of choice.the pitch range from 1.27mm,2.0mm, and 2.54mm here.
IDC DIP Plug Connectors Key Specifications/Special Features:
Materials:
Insulator: PBT, glass reinforced, rated UL94V-0
Contact: phosphor bronze or brass
Electrical specifications:
Pitch: 1.27/2.0/2.54mm
Current rating: 1A, 250V AC
Contact resistance: 30M Ohms (maximum)
Insulation resistance: 3,000M Ohms, minute
Dielectric withstanding voltage: 500V AC for one minute
Operating temperature: -40 to +105 degrees Celsius
Terminated with 1.27mm pitch flat ribbon cable
Number of contacts: 06,08, 10, 12, 14, 16, 20, 24, 26, 30, 32,34, 40, 50, 60 and 64P
With RoHS mark
Used for ribbon cables
DIP Plug Connectors Application
Wire to Board
Apply to Industries : PC, IPC, Consumer Electronics, Automotive, Home Appliance, Medical
Dip Connector,Dip Plug Connector,Dip Direct Pulg Connector,IDC Plug Connector,Idc connector dip plug,1.27mm Dip Plug Connector,2.0mm Dip Plug Connector, and 2.54mm Dip Plug Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com