Whistpool's main aluminate green phosphors meet this need and offer a range of LuAG phosphors for different package types and requirements: emission wavelengths from 515nm to 540nm, particle size 7~16μm to meet customer diversity needs It provides a good solution for high-brightness light source products. At present, the 520-band green phosphor is highly praised by high-end designers and has been widely recognized and widely used in the market.
With the market's recognition of the stability of aluminate products and the need for the diversity of aluminate products, Whistpool has gradually improved its product line and now covers the full range of green and yellow aluminate phosphors (515nm~ 565nm) and full particle size (4μm~21μm) to meet the diverse needs of customers. At the same time, Whistpool successfully developed the aluminate orange phosphor, and made a major breakthrough. The light efficiency and stability are far superior to the commercially available silicate phosphors, and will be tested in the near future.
Related products are shown in the table below:
(This article is contributed by Whistler)
Semiconductor Fuse And Ferrite
Fuse refers to an electric appliance that, when the current exceeds the specified value, melts the fuse and disconnects the circuit with the heat generated by itself.When the current exceeds the specified value for a period of time, the fuse melts and disconnects the circuit with the heat generated by the fuse itself.A current protector made from this principle.The fuse is widely used in high and low voltage power distribution system and control system as well as power equipment.
Ferrite is a metal oxide with ferrous magnetism.As far as electrical properties are concerned, the resistivity of ferrite is much larger than that of single metal or alloy magnetic materials, and it has higher dielectric properties.Ferrite magnetic energy also shows high permeability at high frequencies.As a result, ferrite has become a non-metallic magnetic material widely used in the field of high frequency and weak current.Due to the low ferrite magnetic energy stored in the unit volume, saturated magnetic induction strength (Bs) and low (usually only pure iron 1/3 ~ 1/5), and thus limits its higher requirements in the low-frequency magnetic energy density in the field of high voltage and high power applications.
Semiconductor Fuse and Ferrite,Fuse Cutout, Protection Fuse, Square Fuse, Fuse Link, Ceramic Fuse
YANGZHOU POSITIONING TECH CO., LTD. , https://www.yzpst.com