As the latest technical achievement of Audi, matrix LED headlights have been first launched on its flagship model A8L. The application of advanced technology has become one of the most important promotional points of this product. In addition, this technology will also be the first application in Audi's various products, but due to factors such as production costs, Audi will consider A6/S6, A7/S7, RS6, RS7, TT, Q5, Q7 and R8 in the future. When used on higher-end models, this matrix-shaped LED headlight with both artistic and technological will help Audi to enhance its market competitiveness.
When driving at night, the vehicle generally uses a high beam to illuminate the front, while the Audi matrix LED headlights provide full dynamic lighting management. Once the light source sensor detects that the emitted beam hits the opposite or front vehicle, it automatically adjusts or turns off several LED units in the light group, so that the front vehicle is not affected by the bright LED light. This user-friendly design also promotes safe driving.
Audi also added Dynamic display Signal technology to matrix LED headlights, which controls the timing and sequence of each LED unit. Taking the new Audi A8L headlights as an example, the yellow turn signals are composed of multiple sets of LEDs. When lighting, there are fewer to many continuous changes. The interval between each LED is 20 milliseconds, which can be dynamically displayed. The steering direction combines the sense of art and technology, and also enhances the warning effect.
For pedestrian protection, matrix LED headlights have also been specifically equipped with several "protection" light sets for pedestrians. When the night vision auxiliary camera detects a pedestrian or animal in front, the "protection" light group automatically emits three strobes to alert the driver and pedestrians of potential dangers and reduce the probability of nighttime accidents. This kind of flicker is very user-friendly and will not sway to the human eye, but only under the head.
In order to allow drivers to clearly control road information at night, Audi matrix LED headlights can use information from the navigation system to achieve more specific lighting assistance in corners, intersections, etc. Taking the actual driving situation as an example, Audi's new matrix headlights can automatically detect signs on both sides of the road, such as speed limit, forbidden line, turn, etc., while simultaneously illuminating the road surface to cause the driver's note.
WARNING!
Do not plug two or more meters together!
IMPORTANT
Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.
KEYBOARD DEFINITION
1). SET: Set price with button UP.
2). MODE: Exchange display state.
3). UP: Set price combined with button SET.
GENERAL FEATURES
1).Display line power.
2).Display and memory accumulative total power quantity.
3).Display and memory total power charge of price.
THE DATA DISPLAY
Press MODE button the data displays as follows:
W →KWh →PRICE →COST/KWH
↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓
1). Plug in socket and power on, the meter will display real power.
2). Press MODE button once again and release, the meter will display accumulative KWh.
3). Press MODE button once again and release, the meter will display total power charge.
4). Press MODE button once again and release, the meter will display COST/KWH.
SETTING PRICE OF COST/KWH
1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.
2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.
3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.
4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.
5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.
DATA CLEAR
Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.
Power Backlit, Backlit socket, power meter Backlit, energy meter Backlit, backlit adaptor, backlit plug socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com