CD4046 that can be applied to remote receiver

The operating frequency range of the CD4046 is from 0 to 1 MHz, and the PLL can be well adapted in this frequency range. Phase-locked loop circuit when used as a frequency selection, its frequency selection frequency is mainly determined by the external capacitor values ​​between the 6 and 7 feet and 11-pin external resistance value, as long as the parameters of these components are selected, the phase-locked loop The center frequency of the VCO is determined and the frequency of the PLL is determined. This feature of the PLL can be applied to the channel selection circuit of the remote receiver. For example, when we use it for a channel selection circuit of a dual-channel remote control receiver, only the center frequency of the selected channel is selected, and the external capacitance value corresponding to the center frequency between its pinets 6 and 7 can be selected. The composition of this circuit is shown in the figure.

(a) is a remote control transmitter circuit; (b) is a receiver circuit.

CD4046 that can be applied to remote receiver

MINI MELF

The products can provide various specifications of rectifier bridge devices according to customer requirements. The electrical properties, appearance, reliability, safety indicators and environmental protection indicators of the products all meet the relevant standards.

Planar Die Construction Sealed Glass Case Ideally Suited for Automated Insertion - 75V Nominal Zener Voltages

Case: MiniMELF, Glass Terminals: Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Approx. Weight: 0.05 grams
= 25°C unless otherwise specified Symbol Pd VF RqJA Tj, TSTG Value to +175 Unit mW V K/W °C
Characteristic Forward Voltage = 200mA Thermal Resistance, Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Notes:
1. Tested with Pulses, 20ms. 2. Valid provided that Electrodes are kept at Ambient Temperature.
1. Tested with pulses = 20 ms. 2. Valid provided that electrodes are kept at ambient temperature.
VZ, ZENER VOLTAGE (V) Fig. 1, Zener Current vs Zener Voltage
25 20 VZ, ZENER VOLTAGE (V) Fig. 8, Zener Current vs Zener Voltage
TA, AMBIENT TEMPERATURE (°C) Fig. 3, Power Dissipation vs Ambient Temperature
15 20 VZ, ZENER VOLTAGE (V) Fig. 4, Differential Zener Impedance
VZ, ZENER VOLTAGE (V) Fig. 5, Junction Capacitance vs Zener Voltage

MINI MELF,Smd mini melf,zener mini melf,mini melf package,mini melf resistor,mini melf diode,mini melf resistor datasheet

Changzhou Changyuan Electronic Co., Ltd. , https://www.cydiode.com